The Ba(Zn(1/3)Ta(2/3))O(3) (BZT) ceramic samples were prepared by solid-state reaction and sintered in the range 1550-1650 degrees C for 2 h. Several methods--X-ray diffraction (XRD) and scanning electron microscopy (SEM)--were used for structural and morphological characterization. The unit cell distortion and the presence of the secondary phase content were studied by XRD. A long-range order with a 2:1 ratio of Ta and Zn cations on the octahedral positions of the perovskite structure was noticed with the increase of the sintering temperature. SEM investigations revealed polyhedral well-faceted grains and large grain size distribution. The dielectric properties in the microwave range were measured at room temperature and at 1 kHz on a large temperature interval (+/-150 degrees C). The dielectric parameters were correlated with morphological and structural properties. Ceramic samples were annealed at 1410 degrees C for 30 h to improve the microwave properties. The dielectric constant of BZT samples measured at 6 GHz and at 1 kHz was between 27 and 28 on the whole temperature range, that is, typical values for BZT material. The temperature coefficient of the resonance frequency at 6 GHz exhibits positive values less than 6 ppm/degrees C.