Fatigue induced changes in conical implant-abutment connections

Dent Mater. 2015 Nov;31(11):1415-26. doi: 10.1016/j.dental.2015.09.004. Epub 2015 Sep 28.

Abstract

Objectives: Based on the current lack of data and understanding of the wear behavior of dental two-piece implants, this study aims for evaluating the microgap formation and wear pattern of different implants in the course of cyclic loading.

Methods: Several implant systems with different conical implant-abutment interfaces were purchased. The implants were first evaluated using synchrotron X-ray high-resolution radiography (SRX) and scanning electron microscopy (SEM). The implant-abutment assemblies were then subjected to cyclic loading at 98N and their microgap was evaluated after 100,000, 200,000 and 1 million cycles using SRX, synchrotron micro-tomography (μCT). Wear mechanisms of the implant-abutment connection (IAC) after 200,000 cycles and 1 million cycles were further characterized using SEM.

Results: All implants exhibit a microgap between the implant and abutment prior to loading. The gap size increased with cyclic loading with its changes being significantly higher within the first 200,000 cycles. Wear was seen in all implants regardless of their interface design. The wear pattern comprised adhesive wear and fretting. Wear behavior changed when a different mounting medium was used (brass vs. polymer).

Significance: A micromotion of the abutment during cyclic loading can induce wear and wear particles in conical dental implant systems. This feature accompanied with the formation of a microgap at the IAC is highly relevant for the longevity of the implants.

Keywords: Ankylos; Astra Tech; Bone level; Deformation; Dental implants; Fatigue induced; IAC; Nobel Active; Stability; Titanium.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Dental Abutments*
  • Dental Implant-Abutment Design*
  • Dental Implants
  • Microscopy, Electron, Scanning
  • Titanium

Substances

  • Dental Implants
  • Titanium