Lithium-sulfur (Li-S) batteries are excellent rechargeable battery candidates which are extraordinarily promising as they exhibit superior specific capacity and well-known energy density; they are cost-effective and environmentally benign. Nevertheless, a few technical issues pose a significant challenge on the path to industrial applications, namely, capacity fade and Coulombic efficiency decay, which are inherent in the soluble polysulfide shuttle effect during charge/discharge cycling. Carbon materials which have excellent conductive scaffold and flexible structure with a variety of morphologies can serve as a remedy to this issue. Herein, with a well-designed melt-diffusion procedure, we prepared three carbon-based sulfur-embedded cathodes with diverse structures [graphene, carbon nanotubes (CNTs), and flake graphite]. Sulfur loading varies between 60 and 73 wt %. Among these three carbon/S cathodes, beyond 100 cycles, the graphene/S cathode showed a discharge capacity of 840 mA h g-1 at 0.2 A g-1 current density and its average Coulombic efficiency was above 99.4%, demonstrating the best cycle stability and reversibility. While at a higher current rate, 1 A g-1, CNT/S reaches the best capacity of 518 mA h g-1 among these three cathodes, revealing excellent sulfur utilization under high rate conditions. The X-ray photo spectroscopy shows evidence for chemical bonding between graphene/CNTs surfaces and carbonyl, hydroxyl, and ether groups, resulting in well-confined polysulfides in the cathode side, which significantly restrain the movement of soluble polysulfide in the charging process and efficiently decreases the capacity fading of sulfur. This unique structure is a potential explanation for the outstanding electrochemical performance.
Copyright © 2019 American Chemical Society.