Transfemoral Socket Fabrication Method Using Direct Casting: Outcomes Regarding Patient Satisfaction with Device and Services

W R Marable; C Smith; B Þ Sigurjónsson; I F Atlason; G A Johannesson

doi:10.33137/cpoj.v3i2.34672

Transfemoral Socket Fabrication Method Using Direct Casting: Outcomes Regarding Patient Satisfaction with Device and Services

Can Prosthet Orthot J. 2020 Nov 23;3(2):34672. doi: 10.33137/cpoj.v3i2.34672. eCollection 2020.

Authors

W R Marable¹, C Smith¹, B Þ Sigurjónsson², I F Atlason³, G A Johannesson^{2

4}

Affiliations

¹ Össur Americas, Foothill Ranch, California, USA.
² Össur HF, Reykjavik, Iceland.
³ Quick Lookup, Reykjavik, Iceland.
⁴ TeamOlmed, Stockholm, Sweden.

Abstract

Background: Direct Socket for transfemoral (DS-TF) prosthetic user is a novel method of fabricating a laminated interface on to the residual limb but requires different training, production method and service model than what most prosthetists are familiar with. This method and model may improve patient satisfaction by enabling interface fabrication and delivery in one visit.

Objectives: Document patient satisfaction regarding DS-TF interface versus the prosthetic users' previous socket in terms of interface function and the clinic service model.

Methodology: In this longitudinal study (from July 2018 to April 2020), the DS-TF was implemented in six prosthetic clinics across the United States. Certified prosthetists (CP) and assistants were trained using a standard protocol. 47 prosthetic users participated, both those in need of a new socket and those without need. Two modules from the Orthotics and Prosthetics Users' Survey (OPUS), involving questions related to satisfaction with the Device and Services, was used to evaluate each DS-TF user outcome vs. baseline. The only part of the prosthesis that was replaced was the interface, except in 2 cases.

Findings: Each DS-TF interface was fabricated, fit and delivered in a single clinic visit. At 6-months follow-up, 38 users reported an average of 29.8% increase in satisfaction with their new interface compared with original, and a 14.8% increase in satisfaction with the services they received from the clinic in providing of the new prosthesis vs. their original prosthesis. The main outcome increases were between baseline (initial fitting) and 6-week follow-up and remained consistent after 6 months. This improvement was consistent irrespective if the user needed a new socket for clinical reasons or not.

Conclusions: This study shows that after a standardized training and implementation, the DS-TF fabrication process including a new interface, improves the user's satisfaction with their prosthetic device and services.

Keywords: Amputee; Direct casting; Interface; Outcome measure; Prosthesis; Satisfaction; Socket; Transfemoral amputation.