Probability of Cavitation in a Custom Iron-Based Coupling Medium for Transcranial Magnetic Resonance-Guided Focused Ultrasound Procedures

Connor Edsall; Austin Fergusson; Richey M Davis; Craig H Meyer; Steven P Allen; Eli Vlaisavljevich

doi:10.1016/j.ultrasmedbio.2023.08.015

Probability of Cavitation in a Custom Iron-Based Coupling Medium for Transcranial Magnetic Resonance-Guided Focused Ultrasound Procedures

Ultrasound Med Biol. 2023 Dec;49(12):2519-2526. doi: 10.1016/j.ultrasmedbio.2023.08.015. Epub 2023 Sep 18.

Authors

Connor Edsall¹, Austin Fergusson², Richey M Davis³, Craig H Meyer⁴, Steven P Allen⁵, Eli Vlaisavljevich⁶

Affiliations

¹ Department of Biomedical Engineering and Mechanics, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA.
² Translational Biology, Medicine, and Health Graduate Program, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA.
³ Department of Chemical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA.
⁴ Biomedical Engineering, University of Virginia, Charlottesville, VA, USA.
⁵ Department of Electrical and Computer Engineering, Brigham Young University, Provo, UT, USA.
⁶ Department of Biomedical Engineering and Mechanics, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA; ICTAS Center for Engineered Health, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA. Electronic address: eliv@vt.edu.

Abstract

Objective: A coupling bath of circulating, chilled, degassed water is essential to safe and precise acoustic transmittance during transcranial magnetic resonance-guided focused ultrasound (tMRgFUS) procedures, but the circulating water impairs the critical real-time magnetic resonance imaging (MRI). An iron-based coupling medium (IBCM) using iron oxide nanoparticles previously developed by our group increased the relaxivity of the coupling bath such that it appears to be invisible on MRI compared with degassed water. However, the nanoparticles also reduced the pressure threshold for cavitation. To address this concern for prefocal cavitation, our group recently developed an IBCM of electrosterically stabilized and aggregation-resistant poly(methacrylic acid)-coated iron oxide nanoparticles (PMAA-FeOX) with a similar capability to reduce the MR signal of degassed water. This study examines the effect of the PMAA-FeOX IBCM on the cavitation threshold.

Methods: Increasing concentrations of PMAA-FeOX nanoparticles in degassed, deionized water were placed at the focus of two different transducers to assess low and high duty-cycle pulsing parameters which are representative of two modes of focused ultrasound being investigated for tMRgFUS. Passive cavitation detection and high-speed optical imaging were used to measure cavitation threshold pressures.

Results: The mean cavitation threshold was determined in both cases to be indistinguishable from the degassed water control, between 6-8 MPa for high duty-cycle pulsing (CW) and between 25.5-26.5 MPa for very low duty-cycle pulsing.

Conclusion: The findings of this study indicate that an IBCM of PMAA-FeOX nanoparticles is a possible solution to reducing MRI interference from the coupling bath without increasing the risk of prefocal cavitation.

Keywords: Cavitation; Magnetic resonance-guided; Nanoparticles; Transcranial focused ultrasound.

Publication types

Research Support, N.I.H., Extramural
Research Support, Non-U.S. Gov't

MeSH terms

Acoustics*
Magnetic Resonance Imaging* / methods
Magnetic Resonance Spectroscopy
Probability
Water

Substances

polymethacrylic acid
Water

Abstract

Publication types

MeSH terms

Substances

Grants and funding