This study examines the crack resistance of basalt-fiber-reinforced concrete (BFRC) materials subjected to freeze-thaw cycles (FTCs). We utilized a φ50 mm Split Hopkinson Pressure Bar (SHPB) apparatus alongside numerical simulations to carry out impact compression tests at a velocity of 5 m/s on BFRC specimens that experienced 0, 10, 20, and 30 FTCs. Additionally, we investigated the effects of basalt fiber (BF) orientation position and length on stress intensity factors. The results reveal that with an increasing number of FTCs, the dynamic crack propagation speed of BFRC with a prefabricated crack inclined at 0° rises from 311.84 m/s to 449.92 m/s, while its pure I fracture toughness decreases from 0.6266 MPa·m0.5 to 0.4902 MPa·m0.5. For BFRC specimens with a prefabricated crack inclination of 15°, the dynamic crack propagation speed increases from 305.81 m/s to 490.02 m/s, accompanied by a reduction in mode I fracture toughness from 0.3901 MPa·m0.5 to 0.2867 MPa·m0.5 and mode II fracture toughness from 0.6266 MPa·m0.5 to 0.4902 MPa·m0.5. In the case of a prefabricated crack inclination of 28.89°, the dynamic crack propagation speed rises from 436.10 m/s to 494.28 m/s, while its pure mode II fracture toughness decreases from 1.1427 MPa·m0.5 to 0.7797 MPa·m0.5. Numerical simulations indicate that fibers positioned ahead of the crack tip-especially those that are longer, located closer to the crack tip, and oriented more perpendicularly-significantly reduce the mode I stress intensity factor. However, these fibers have a minimal impact on reducing the mode II stress intensity factor. The study qualitatively and quantitatively analyzes the crack resistance of basalt-fiber-reinforced concrete in relation to freeze-thaw cycles and the fibers ahead of the crack tip, offering insights into the fiber reinforcement effects within the concrete matrix.
Keywords: basalt fiber; concrete; crack propagation rate; crack resistance; dynamic fracture toughness; freeze–thaw cycles.