The mechanical properties of three sizes of stainless steel (SS), nickel-titanium (NT), and titanium-molybdenum (TM) orthodontic wires were studied in tension, bending, and torsion. The wires (0.016 inch, 0.017 by 0.025 inch, and 0.019 by 0.025 inch) were tested in the as-received condition. Tensile testing and stiffness testing machines along with a torsional instrument were used. Mean values and standard deviations of properties were computed. The data were analyzed statistically by analysis of variance using a factorial design. Means were ranked by a Tukey interval calculated at the 95 percent level of confidence. In tension, the stainless steel wires had the least maximum elastic strain or springback, whereas the titanium-molybdenum wires had the most. Higher values of springback indicate the capacity for an increased range of activation clinically. In bending and torsion, the stainless steel wires had the least stored energy at a fixed moment, whereas the nickel-titanium wires had the most. Spring rates in bending and torsion, however, were highest for stainless steel wires and lowest for nickel-titanium wires. A titanium-molybdenum teardrop closing loop delivered less than one half the force of a comparable stainless steel loop for similar activations.